Skip to content
Cart
Acmella Oleracea

Spilanthol and Expression Lines: Paracress Extract (Acmella Oleracea Extract) for Hydrophilic Pro-Age Formulations

The Paracress Extract from CONIUNCTA® (INCI: Acmella Oleracea Extract) is a liquid cosmetic raw material derived from Acmella oleracea, obtained using purified water as the extraction solvent. We offer it in three hydrophilic carrier variants: glycerin, propylene glycol/water and pentylene glycol/water. The extract is of conventional quality, is suitable for vegans according to the CDS and is intended exclusively for the cosmetics industry; it is not suitable for food applications. Two points are particularly relevant for formulators: the documented lead marker spilanthol and the effect on expression lines stated in the CDS. In this article we put both into context, along with the differences between the carriers, the allergen calculation and the key regulatory data from the safety data sheet.

Spilanthol as lead marker: calculated contents put transparently into context

The CDS lists spilanthol, a member of the alkylamides, as the primary marker of the Paracress Extract. For the product itself, a content of 105 to 405 µg/g is stated, explicitly as a calculated rather than a measured value. As a reference, the data sheet cites the literature content of spilanthol in the dried plant as 0.5 to 1.5 % (Boonen et al. 2012, Paulraj et al. 2013). No further individual compounds are specified in the CDS, and standardisation to a defined spilanthol content is not stated in the dossier.

The calculation example in the CDS is helpful for product documentation: at an extract use level of 3.5 %, the calculated result is 3.7 to 14.2 µg/g spilanthol in the finished formulation. This allows the order of magnitude of the marker in the end product to be presented in a traceable way. If a project requires analytically robust individual values, bear in mind that these are calculated ranges reflecting the natural variability of the plant material.

Smoothing expression lines and five claim areas from the CDS

As a documented effect, the CDS states verbatim "Smooths expression lines", i.e. the smoothing of mimic or expression lines. In addition, the data sheet lists five claim areas: "Balancing", "Conditioning", "Pore-refining", "Skin-plumping" and "Pro-age". This allows the extract to be positioned thematically in several product concepts, for example in pro-age facial care focusing on expression lines, in pore-refining care products or in balancing care concepts that address a plumper-looking complexion.

One note from the CDS is central to the claim strategy: substantiation of advertising claims is the responsibility of the manufacturer, based on Regulation (EC) 1223/2009, Art. 20, and Regulation (EU) 655/2013. The information in the data sheet is therefore a sound starting point for concept development, but does not replace substantiation of the claims on the specific finished product. The use concentration documented in the CDS and TDS is 2 to 5 % for all variants.

Glycerin, propylene glycol or pentylene glycol: three hydrophilic carriers compared

All three variants share an extract content of approx. 30 % and purified water as the extraction solvent. According to the product information, 1 kg of CONIUNCTA® extract contains the hydrophilic constituents of approx. 30 g of dried plant parts. The variants differ in their carrier system and therefore in their INCI declaration:

  • Glycerin variant: approx. 70 % anhydrous glycerin (≥ 99.5 %) and approx. 30 % extract. INCI: Glycerin, Acmella Oleracea Extract. According to the TDS, a light yellow to brown, clear liquid with a characteristic odour.
  • Propylene glycol variant: approx. 40 % water, approx. 30 % extract and approx. 30 % propylene glycol. INCI: Aqua, Propylene Glycol, Acmella Oleracea Extract.
  • Pentylene glycol variant: approx. 50 % water, approx. 30 % extract and approx. 20 % pentylene glycol. INCI: Aqua, Pentylene Glycol, Acmella Oleracea Extract.

In practice, the overall formulation often determines the choice of carrier: the glycerin variant does without Aqua in the INCI, while both glycol variants list water as the first ingredient. If your formulation already includes glycerin, propylene glycol or pentylene glycol, choosing the matching variant helps you aim for a lean INCI list. According to the product information, all three variants are suitable for cosmetic applications. For an overview of further glycerin-based extracts, see our collection Glycerin Extracts.

Essential oil and Annex III allergens: the calculation for leave-on products

The CDS quantifies the essential oil content in the dried plant at 0.01 to 0.1 %. For labelling of Annex III allergens, the data sheet provides a specific calculation: at 5 % use level, i.e. at the upper limit of the documented use concentration, a maximum of 1.5 mg/kg results in the finished product. The threshold for leave-on products is 10 mg/kg. According to the CDS, there is therefore no labelling requirement.

Here too, this is a calculated value. The final assessment of the finished product is carried out as part of the safety assessment by the responsible person under Regulation (EC) 1223/2009, to which the safety data sheet also refers. The CDS calculation facilitates this assessment because it already shows the margin to the threshold for the worst documented use case.

Safety data sheet, storage and logistics

Under the CLP Regulation (EC) 1272/2008, the Paracress Extract is not a hazardous substance and no labelling is required. The SDS identifies no PBT or vPvB constituents. The raw material is not dangerous goods under ADR/RID, IMDG and IATA, does not fall under Seveso III and is classified for all carrier variants in WGK 1 (slightly hazardous to water); the storage class under TRGS 510 is 12 (non-combustible liquids). REACH registration is not applicable, as the product is a mixture and the extract is exempt under Annex V No. 8. In addition, the product is not a biocidal product within the meaning of Regulation (EU) 528/2012. According to the SDS, no toxicological or ecotoxicological data are available, and flash point determination according to EN ISO 2719 is still pending.

For handling, the SDS specifies wearing safety glasses according to EN 166; skin protection is not required, respiratory protection only if aerosols are formed. Spilled material is taken up with liquid-binding material such as sand, diatomaceous earth or universal binder and must not enter the sewage system. The shelf life is 24 months when stored dry in the original sealed container; the TDS specifies 10 to 30 °C for this, the SDS a storage temperature of 15 to 25 °C. Temperature-dependent colour changes may occur during storage. Should turbidity or precipitation occur, filtration is required, which does not affect the quality of the product.

Data sheets, CoA and enquiries

We provide TDS, SDS and CDS for each carrier variant. Values such as pH (25 °C) and relative density are batch-specific and stated in the respective certificate of analysis (CoA). You can find out which documents are relevant for your project on our page on technical documentation (TDS/SDS/CDS). We classify the Paracress Extract among our classic plant extracts, where you will find further aqueous-extracted raw materials for your care concepts.

Our technical team will answer specific formulation and dosage questions individually, by email at info@coniuncta.com or by phone at +49 911 47715370. All variants, data sheets and ordering information can be found directly on the product page: View Paracress Extract (Acmella Oleracea Extract) in the CONIUNCTA® shop.

CONIUNCTA®: raw materials, data and services for future-ready formulations.